Pressure

Products > Pressure

Datalogger

Programmable datalogger for level measuring with RS485 interface DL.OCS/N/RS485 wireless
Programmable The STS DL.OCS is an integrated pressure sensor and datalogger for level, temperature and conductivity measurement in surface and groundwater applications. It features a robust measuring cell for long term accuracy, available in stainless steel or titanium and its built in datalogger manages and stores all measurements at user-programmable intervals.

FEATURES
  • Pressure measuring range: 0…250 mH2O
  • Total Error: ≤ ± 0.05 % FS (-5…50 °C)
  • Temperature measuring range: -5…80 °C
  • Operating temperature: -5…80 °C
  • Process temperature: -5…80 °C
  • Interface: RS485
  • Materials: Stainless steel, titanium
  • Battery operation, Measurement interval 1s … 24h, 1.5 Mio. Measurement values
CUSTOMER BENEFITS
  • Multi-parameter probe: pressure, temperature and conductivity
  • High-precision digital data logger with user-friendly software
  • Thanks to the huge memory (1.5 Mio. values per channel) and the long battery lifetime (up to 10 years) the cost of ownership can be reduced to a minimum
  • For varying conditions of use, 16 measuring series can be set up parallel
  • Stainless steel and titanium version for use in acidic or otherwise aggressive media
Details
Watermanager Solution DL.WMS/GPRS/R wireless
  • Compact and robust version
  • Installation in 2″ / piezo tube or 4″ wall-/mast installation
  • Quadband GSM/GPRS engine
  • Online programming
Details

Fluid Level

Level transmitter for corrosive media ATM/NC ex
ATM.NC
  • Measuring range from 0…1mwc and 0…250mwc
  • Gauge, absolute or sealed gauge
  • Chemical resistant level transmitter
    made of PVDF
  • Available with PE, PUR or Teflon cable, also connectable
Details
Miniature pressure transmitter for level measurement MTM/N10
MTM.N10
  • Measuring range from 0…10mwc and 0…100mwc
  • Compact version with an outer diameter of 10 mm
  • Also as datalogger deliverable
Details
Pressure Transmitter ATM.1ST/N, ATM.1ST/N/Ex ex
ATM.N.1st
  • Measuring range from 0…0.5mH2O and 0…250mH2O
  • Reverse polarity and short circuit protected
  • Compact and robust stainless steel
    assembly 1.4435 (316L) or titanium
  • High accuracy
Details
Pressure Transmitter ATM.ECO/N, ATM.ECO/N/Ex ex
ATM.N.ECO
  • Measuring range from 0…1mH2O and 0…250mH2O
  • Reverse polarity and short circuit protected
  • Compact and robust stainless steel
    assembly 1.4435 (316L) or titanium
Details
Pressure transmitter for level measurement ATM/N 19
ATM.N.19
  • Measuring range from 0…0.5mwc and 0…250mwc
  • 19mm outer diameter
  • Available with PE- or PUR cable
Details
Pressure transmitter for level- and temp. measurement ATM/N/T
ATM.N.T
  • Gauge or absolute
  • Measuring ranges from 0…0.5mwc and 0…250mwc
  • Temperature measuring range -25…100°C
Details
Digital pressure transmitter DTM.OCS.S/N
DTM.OCS.S_N
    • Pressure measuring range: 1…250 mH2O
    • Accuracy: ≤ ± 0.15 / 0.05 / 0.03 % FS
    • Operating temperature: -5…80 °C
    • Process temperature: -5…80 °C
    • Interface: RS485
    • Materials: Stainless steel, Titanium

Benefits: Any process connections available

Details
Pressure transmitter for level measurement TM/N
TM.N
  • Measuring range from 0…0.5mwc and 0…250mwc
  • Ratiometric mV output signal
  • Available with PE, PUR or Teflon cable
Details
Programmable pressure transmitter for level measurement PTM/N/Ex ex
PTM.N.Ex
  • Piezoresistive measuring element
  • Pressure range -5% till +105% FS until 1:4 adjustable
  • Measuring range 0…50 mbar till 0…25 bar
Details
Programmable pressure transmitter for level measurement PTM/N (RS485)
PTM.N (RS485)
  • Measuring range from 0…0.5mwc and 0…250mwc
  • Adjustable 1:4 of the nominal range
    within -5% to +105% FS
  • Accuracy temperature measurement +/-2°C
Details
Programmable pressure transmitter for level measurement PTM/N SDI-12
PTM.N.SDI-12
  • Measuring ranges from 0…0.5mwc and 0…250mwc
  • Accuracy temperature measurement +/- 0.25°C
  • SDI-12 interface
Details
Programmable datalogger for level measuring with RS485 interface DL.OCS/N/RS485 wireless
Programmable The STS DL.OCS is an integrated pressure sensor and datalogger for level, temperature and conductivity measurement in surface and groundwater applications. It features a robust measuring cell for long term accuracy, available in stainless steel or titanium and its built in datalogger manages and stores all measurements at user-programmable intervals.

FEATURES
  • Pressure measuring range: 0…250 mH2O
  • Total Error: ≤ ± 0.05 % FS (-5…50 °C)
  • Temperature measuring range: -5…80 °C
  • Operating temperature: -5…80 °C
  • Process temperature: -5…80 °C
  • Interface: RS485
  • Materials: Stainless steel, titanium
  • Battery operation, Measurement interval 1s … 24h, 1.5 Mio. Measurement values
CUSTOMER BENEFITS
  • Multi-parameter probe: pressure, temperature and conductivity
  • High-precision digital data logger with user-friendly software
  • Thanks to the huge memory (1.5 Mio. values per channel) and the long battery lifetime (up to 10 years) the cost of ownership can be reduced to a minimum
  • For varying conditions of use, 16 measuring series can be set up parallel
  • Stainless steel and titanium version for use in acidic or otherwise aggressive media
Details

Pressure & Temperature

Programmable pressure transmitter PTM (RS485)
PTM (RS485)
  • Pressure ranges from 0…100 mbar and 0…1000
    bar available
  • Adjustable 1:4 of the nominal range
    within -5% to +105% FS
  • Accuracy pressure measurement ≤ 0.1%
  • Temperature measuring range +/-2°C
Details
Transmitter for pressure and temperature ATM/T
ATM.T
  • Pressure ranges from 0…50 mbar and -1…1000
    bar available
  • Accuracy pressure measurement ≤ 0.1%
  • Temperature measuring range -25…100°C
Details
Temperature Transmitter TS 100
TS100
  • Temperature measuring range -50…150°C
  • Max. pressure up to 850 bar
  • Accuracy +/-2°C
  • Current or voltage output available
Details

Pressure Transmitter

Pressure Transmitter ATM.1ST, ATM.1ST/Ex ex
ATM.1st
  • Compact and robust stainless assembly or titanium
  • Piezoresistive measuring element
  • Measuring range 0…50 mbar till 0…1000 bar
  • High accuracy
Details
Pressure Transmitter ATM.ECO, ATM.ECO/Ex ex
ATM.ECO
  • Compact and robust stainless assembly or titanium
  • Piezoresistive measuring element
  • Measuring range 0…100 mbar till 0…1000 bar
Details
Pressure transmitter with 2 set points ATM/GR
ATM.GR
  • Pressure ranges from 0…50 mbar and -1…1000
    bar available
  • 2 limit switches adjustable over 0…100% of the
    pressure range
  • Additional 0…20mA / 4…20mA analog output
Details
Miniature pressure transmitter ATM.mini
  • Pressure measuring range: 1 bar … 100 bar
  • Accuracy: ≤ ± 0.2 / 0.1 % FS
  • Operating temperature: -40 … 125°C
  • Process temperature: -40 … 125°C
  • Output signal: 0.5 … 4.5 VDC / 4 … 20 mA
  • Total Error Band: ≤ ± 0.5 %FS
  • Process connection: 1/8 NPT M, 3/8 – 24 UNJF, M8 x 1 M, M10 x 1 M
  • Materials: Stainless steel
Details
Digital pressure transmitter DTM.OCS.S
DTM.OCS.S
    • Pressure measuring range: 200 mbar…100 bar
    • Accuracy: ≤ ± 0.15 / 0.05 / 0.03 % FS
    • Operating temperature: -40…85 °C
    • Process temperature: -25…85 °C
    • Interface: RS485
    • Materials: Stainless steel, Titanium

Benefits: Any process connections available

Details
Pressure Transmitter PTM/Ex ex
PTM.Ex
  • Piezoresistive measuring element
  • Pressure range -5% till +105% FS until 1:4 adjustable
  • Measuring range 0…100 mbar and 0…1000 bar
Details
Programmable pressure transmitter PTM (RS485)
PTM (RS485)
  • Pressure ranges from 0…100 mbar and 0…1000
    bar available
  • Adjustable 1:4 of the nominal range
    within -5% to +105% FS
  • Accuracy pressure measurement ≤ 0.1%
  • Temperature measuring range +/-2°C
Details
Passvie pressure transmitter TM, TM/Ex ex
TM
  • Pressure ranges from 0…50 mbar and 0…1000
    bar available
  • Approval according directive intrinsical safety
    II 1G EEx ia IIC T3…T6 and II 1D T90°C IP 6X
  • Ratiometric output signal in addiction to input terminal voltage
Details

Subsea Pressure Transmitter

Subsea Pressure Transmitter SPT
SPT Subsea Pressure Transmitter The subsea pressure transmitters has been designed for the offshore and gas industry as a high performance device for reliable and long term subsea use. It is fully submersible for an ambient pressure up to 350bar. The product suits the specific requirements of subsea hydraulic control & drilling systems.

  • Ranges up to 1035bar
  • External/Ambient pressure 350bar
  • Accuracy +-0.25%/+-0.1%
  • Output analogue 4 … 20mA
  • All welded construction
  • Customised design available
  • Flange or piston sealed process connection
Details

Transducer

Transducer
Transducer TD
  • Pressure measuring range: 100 mbar…1000 bar
  • Accuracy: ≤ ± 0.50 / 0.25 % FS
  • Output signal: mV
  • Materials: Stainless steel, Titanium, Hastelloy
Details
Polynom Transducer
Polynom Transducer
  • Pressure measuring range: 2 bar…100 bar
  • Total Error: ≤ ± 0.2 % rdg (30…100 %FS)
  • Compensation: -40…60 °C
  • Operating temperature: -40…150 °C
  • Output signal: mV
  • Materials: Stainless steel
Details

Wireless

Communication module with GSM- or analog modem wireless
GSM
  • Triband GSM engine or analog modem
  • Usable temperature range -20…55°C
  • Online programming or via SMS
  • Acknowledgement of events by SMS
Details
Watermanager Solution DL.WMS/GPRS/R wireless
  • Compact and robust version
  • Installation in 2″ / piezo tube or 4″ wall-/mast installation
  • Quadband GSM/GPRS engine
  • Online programming
Details

Software

Custom Software DL.OCS software

Software

The real star of the show is the Windows-based, user friendly, innovative software. Designed specifically for the new data logger DL.OCS/N/RS485, its custom user interface will impress.Based on the STS developed Noesis platform, the software can be individually configured to meet your specific needs, thus simplifying and facilitating data collection and processing.

Whether a date range or parameter specific analysis of the data is required or a read out of the current measurements, the demands on the software handling are identical: software should be simple and natural to use. The MS Windows-based software DL.OCS is controlled via icons, all data relevant to the task is, (administrator-defined), shown or hidden.

This allows the user (field engineer or administrator) to see only the relevant facts needed to carry out the task, without having to search. This provides an extremely fast readout of the data; only one button is required to complete the analysis.

Additionally, up to four measurement series can run parallel; up to 16 measurements can be stored.

Don’t just take our word for it, try the software yourself and you will be pleased with how easy it is to use and customize to your specific needs.

Details

Copyright © 2019 Sensors AS - All Rights Reserved
|HOME| |PRODUCTS| |HYDROPOWER| |NEWS| |CONTACT|
---
Sensors AS | Setersletta 3 | 2006 Løvenstad | Norway | Phone: +47 67 90 43 00 | Org. nr. NO 982 517 346 MVA

Sensors AS