Acceleration

Products > Acceleration

Select category:

Embedded Accelerometers

General information

Designed for application durability in harsh environments, the embedded vibration sensors are available in various board mounted silicon MEMS accelerometers and Piezoelectric accelerometers.

MV Output DC accelerometer (model 3022)

MV Output DC accelerometer (model 3022)

The accelerometer is packaged on a ceramic substrate with an epoxy sealed ceramic cover and is designed for adhesive mounting. The accelerometer is offered in ranges from ±2g to ±200g range and provides a flat frequency response to minimum 2000Hz. The silicon MEMS sensor is gas damped and incorporates over-range stops for high-g shock protection. For a similar accelerometer designed for bolt mounting, see the model 3028.

Benefits

  • Piezoresistive MEMS
  • DC Response
  • Circuit board mountable
  • Low cost
  • Adhesive mounting
  • ±0.5% Non-linearity
  • Open Wheatstone Bridge
  • Gas damping
  • Built-in over-range stops
  • Low power consumption
Download datasheet
MV Output DC accelerometer (model 3028)

MV Output DC accelerometer (model 3028)

It is packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. The accelerometer is offered in ranges from ±2g to ±200g range and provides a flat frequency response to minimum 2000Hz. The silicon MEMS sensor is gas damped and incorporates over-range stops for high-g shock protection.

Benefits

  • Piezoresistive MEMS
  • DC Response, mV Output
  • Low cost
  • Screw mounted flange
  • Bolt mounted
  • ±0.5% Non-linearity
  • Open wheatstone bridge
  • Gas damping
  • Built-in over-range stops
  • Low power consumption
Download datasheet

Plug & Play Accelerometers

General information

‘Plug & Play’ accelerometers and vibration sensors are based on a proprietary MEMS, bonded gauge, and piezoelectric ceramic technology.

Amplified DC Accelerometer (model 4000A/4001A)

Amplified DC Accelerometer (model 4000A/4001A)

The accelerometers incorporate a 3rd generation silicon MEMS sensor providing outstanding performance. The accelerometers are packaged in a rugged aluminum housing ideal for transportation and instrumentation testing. The signal conditioned output incorporates a 2.5V reference that offers the user a differential or single-ended output.

Benefits

  • ±2g to ±200g Dynamic range
  • High over-range protection
  • Signal conditioned output
  • Low power consumption
  • Lightweight
  • Gas damping
  • 8 to 36Vdc Excitation voltage
Download datasheet
MEMS triaxial accelerometer (model 4630)

Amplified DC Triaxial accelerometer (model 4630)

The silicon MEMS accelerometer incorporates integral temperature compensation that provides a stable output over a wide operating range. The three independent circuit assemblies have independent signal conditioning and can operate on common or separate power supplies. The advanced MEMS sensing elements are gas damped in order to provide a wide stable frequency response.

Benefits

  • Three independent circuits
  • Low current consumption
  • Ranges: ±2g to ±200g
  • Gas damped, DC Response
  • High over-range protection
  • -55°C to +125°C Operating range
  • Low transverse sensitivity
Download datasheet

Copyright © 2019 Sensors AS - All Rights Reserved
|HOME| |PRODUCTS| |HYDROPOWER| |NEWS| |CONTACT|
---
Sensors AS | Setersletta 3 | 2006 Løvenstad | Norway | Phone: +47 67 90 43 00 | Org. nr. NO 982 517 346 MVA

Sensors AS