Force/Weight

Products > Force/Weight

Select category:

Accredited Systems

General information

As an option, systems and load cells can be offered with ISO Standards or DAkkS calibration.

Electronic Scale ZW 5.0

ZW 5.0 Electronic Scale

Applications:

  • Dynamometer
  • Force gauge
  • Tensile and compression applications
  • Weighing operations or force measurement
    in many different fields

This fully electronic scale is suitable for measuring tensile and compression loads. It is available for various load ranges between 50 kg and 500 kg. On request, this scale can be supplied for use as a force gauge; the load ranges are then between 500 N and 5000 N. The hanging scale consists of a miniature sensor and a hand-held terminal which are connected by a spiral cable.

  • Low self-weight
  • Nominal loads of 50 kg to 500 kg,
    or of 500 N to 5 000 kN
  • Zero positioning and taring
  • Measure the top load in positive and
    negative direction of force
  • 4 x batteries type AA
  • Requests/settings via one menu
  • Optional with spherical rod ends or eyebolts
Download datasheet
Electronic Scale ZW 6.0

ZW 6.0 Electronic Scale

Applications:

  • Dynamometer
  • Force gauge
  • Tensile and compression applications
  • Weighing operations or force measurement
    in many different fields

This fully electronic scale is suitable for measuring tensile and compression loads. It is available for two load ranges, up to 1000 kg and up to 2000 kg. On request, this scale can be supplied for use as a force gauge; the load ranges are then up to 10 kN and up to 20 kN. The hanging scale consists of a transducer and a hand-held terminal. These are firmly connected to each other with a cable.

  • Low self-weight
  • Nominal loads: 1000 kg or 2000 kg, or
    10 kN or 20 kN
  • Zero positioning and taring
  • Measure the top load in positive and
    negative direction of force
  • 4 x batteries type AA
  • Requests/settings via one menu
  • Optional with spherical rod ends or eyebolts
Download datasheet
Electronic Scale ZW 7.0

ZW 7.0 Electronic Scale

Applications:

  • Dynamometer
  • Force gauge
  • Tensile and compression applications
  • Weighings or force measurements in the
    most diverse areas of application

These fully electronic scales are suited to the measurement of tensile and compression loads. They are available in different load ranges between 5000 kg and 10 000 kg. These scales can also be calibrated as force gauges if desired. The load ranges are then between 50 kN and 100 kN. The hanging scales consist of a transducer and a hand-held terminal. These are firmly connected to each other with a cable.

  • Nominal loads of 5000 kg to 10 000 kg,
    or of 50 kN to 100 kN
  • Zero positioning and taring
  • Measure the top load in positive and
    negative direction of force
  • 4 x batteries type AA
  • Requests/settings via one menu
  • Optional with spherical rod ends or eyebolts
Download datasheet

Hygienic Weighing Solutions

General information

Hygienic load cells is based on the strict hygienic guidelines for the production areas of the food and pharmaceutical industry.

Compression Load Cell PR 6202

Compression Load Cell PR 6202

The PR 6202 is the world's first load cell designed strictly in accordance with the hygienic design principles developed by the European Hygienic Engineering Design Group (EHEDG).

  • Proven rocker-pin principle
  • Full stainless steel construction
  • High overload capacity
  • Hermetically sealed, IP68 (depth of 1.5 m for 10,000 hrs.), IP69K
  • Easy corner adjustment by matched load cell output
  • Wide temperature range
  • Resistant against vibrations
  • Ex-version available (PR 6202/..E)
  • W&M approval (acc. OIML R 60)
Download datasheet
Contego® Weighing Module

Contego® Weighing Module

More hygiene for your process vessel weighing. The innovative weighing module is the solution for hygienic applications - designed by EHEDG guidelines.

  • Preassembled weighing module, including load cell, integrated constrainer and lift-off protection, saving installation time
  • EHEDG-certified product
  • Integrated jack-up function to quickly lift the vessel without hydraulic lifters
  • Sophisticated sealing technology ensures an optimum hygienic design
Download datasheet
Novego® Weighing Module

Novego® Weighing Module

The weighing module Novego® was specifically developed to meet the increasingly stringent requirements of the food industry. This hygienic all-in-one solution boasts a range of innovative properties to ensure simple, error-free installation and maximum resistance to lateral forces.

  • Hygienic weighing module ensures efficient cleaning
  • Quick and easy commissioning due to smart add-on parts
  • High degree of process reliability and precision thanks to the innovative side-force-resistant system
  • Durable, reliable weighing solution with excellent corrosion resistance
Download datasheet

Force Transducers

General information

The range of force transducers is very wide. This one is characterised by a measuring range varying from 10 N to 50 MN (tension and / or compression) and an accuracy of up to 0.01%.

Tension and Compression Load Cell 2710-2715

2710-2715 Load Cell

Universal load cells combining accuracy, sturdiness and easy installation.

  • Material:

    2710: stainless steel

    2715: alloy steel

  • Protection class: IP67
  • Compact design
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Tension and Compression Load Cell 2712

2712 Load Cell

High-accuracy universal load cells, easy to install.

  • Wide range of capacities: from 100 N to 10 kN
  • Overload protection in tension and compression (only for 2712-A and 2712-C)
  • Compact design
  • Protection class: IP54 / IP65
  • Material: anodised aluminium alloy
  • Cable length: 3 m (other lengths available on request)
  • Also available as standard reference load cells according to ISO 376 (classes "1", ''0,5'' and ''00'')
Download datasheet
Low Profile (Pancake) Load Cell 2960-2962-2965

2960-2962-2965 Load Cell

Universal tension and compression load cells for industrial force measurement.

  • Flat design
  • High stiffness and fatigue resistant
  • Highly resistant to transverse forces
  • Protection class: IP66
  • Complete range of mounting accessories available
  • Material: stainless steel (2960)**, anodised aluminium alloy (2962), alloy steel (2965)
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Heavy Compression Load Cell (Very High Capacities) 3110-3115

3110-3115 Load Cell

High-capacity compression load cells.

  • Wide range of capacities: 30 kN (3 t) up to 50 MN (5.000 t)
  • Material: nickel-plated steel (3115) or stainless steel (3110)
  • Protection class: IP65
  • A whole range of mounting accessories is available
  • Cable length: see drawing table - CL (other lengths available on request)
  • Also available as standard reference load cells according to ISO 376 (classes 1, 0,5 and 00)
Download datasheet
Tension and Compression Load Cell (Very High Capacities) 5100-5105

5100-5105 Load Cell

High-accuracy universal load cells, easy to install.

  • Wide range of capacities: 10 kN (1 t) up to 50 MN (5.000 t)
  • Compact design
  • Protection class: IP66
  • Material: stainless steel (5100)**, nickel-plated steel (5105)
  • Cable length: see drawing table - CL (other lengths available on request)
  • Also available as standard reference load cells according to ISO 376 (classes "1", ''0,5'' and ''00'')
Download datasheet
Compression Washer Load Cell 5180-5182

5180-5182 Load Cell

Compression washer annular load cells specially designed for force measurement on bolts.

  • Material:

    Stainless steel body; aluminium housing (5180)

    Anodised aluminium alloy (5182)

    2 washers (included): stainless steel

  • Very low profile for high-capacity load cells
  • Protection class: IP65
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Through Hole (Annular) Heavy-Capacity Load Cell 5190-5195

5190-5195 Load Cell

Annular compression load cells.

  • Low profile for high-capacity load cells
  • Material: stainless steel (5190) or nickel-plated steel (5195)
  • Protection class: IP65
  • Sturdy design
  • Material: anodised aluminium alloy
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Miniature Tension and Compression Load Cell 5930-5932

5930-5932 Load Cell

Sealed and compact tension and compression sensors.

  • Material:

    Stainless steel (5930)

    Anodised aluminium alloy (5932)

  • Protection class: IP65
  • Tension and / or compression (universal)
  • Load accessories available
  • Cable length: 1.5 m (other lengths available on request)
Download datasheet
Miniature Compression Load Cell 5960-5962

5960-5962 Load Cell

Sealed and compact compression sensors.

  • Material:

    Stainless steel (5960)

    Anodised aluminium alloy (5962)

  • Protection class: IP65
  • Cable length: 1.5 m (other lengths available on request)
Download datasheet
Hermetically Sealed Bending Beam Load Cell 2000S

2000S Load Cell

Load cell combining high accuracy and resistance in harsh environment.

  • Material: stainless steel
  • Protection class: IP67 (welded sealing)
  • Complies with OIML / R 60 up to 3000 d for scales in class III according to EN 45501
  • Standardised dimensions
  • Cable length: 3 m (other lengths available on request)
  • Whole range of mounting kits available
Download datasheet
Single Point Load Cell "Off Center" 2052

2052 Load Cell

Small-sized single point load cells.

  • Designed for off-center load
  • Maximum platform size: 250x250 / 400x400 mm (depending on capacity)
  • Small sized
  • Material: anodised aluminium alloy
  • Protection class: IP54
  • Cable length: see drawing table - CL (other lengths available on request)
  • Easy to install
Download datasheet
On-Board Weighing Load Cell 2625-2645

2625-2645 Load Cell

Load cells specially designed for on-board weighing on trucks.

  • Very sturdy design
  • High resistance against shocks
  • Protection class: IP67
  • Material: alloy steel
  • Easy to install (no stabilisation system needed)
  • Screws and blocks to be welded available
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Tension Link Load Cell 5200-5205

5200-5205 Load Cell

Tension link load cells specially adapted for standard shackles.

  • Sturdy design
  • Protection class: IP66
  • Cable length: see drawing table - CL (other lengths available on request)
  • Material: stainless steel (5200), nickel-plated steel (5205)
Download datasheet
Tension Load Cell 5100L-5105L

5100L-5105L Load Cell

Robust and easy to install tension load cells.

  • Wide range of capacities: 2 t up to 100 t
  • Compact design
  • Protection class: IP66
  • Material: stainless steel (5100L), nickel-plated steel (5105L)
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Standard Load Pin 5300

5300 Load Pin

Load pins with standard dimensions.

  • CE certified for hoisting applications
  • Sturdy design
  • Material: stainless steel
  • Protection class: IP65
  • Easy to install
  • Complete range of CE certified electronics and load limiters
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Custom-Made Load Pin 5000

5000 Load Pin

The model 5000 is designed to measure a force or constraint, without any change to the mechanical structure, simply by replacing the clevis pin with the custom-made load pin.

  • Complete range of CE certified electronics, load limiters and displays available for hoisting applications and lifts
  • Sturdy design
  • Material: stainless steel
  • Protection class: IP65 (up to IP68: see options)
  • Easy to install
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Subsea / Submerged Load Pin 5050

5050 Load Pin

Design for underwater applications.

  • Custom-made dimensioning
  • Sturdy design
  • Material: stainless steel
  • Protection class: IP68
  • Easy to install
  • Depth: up to -7500 m / -24 606 ft (750 bars / 11 000 psi) - deeper on request
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Through Hole (Annular) Load Cell 5900

5900 Load Cell

Annular force transducers specially designed for applications requiring a load mesurement through a centred hole.

  • Sturdy design
  • Material: stainless steel
  • Protection class: IP67
  • Easy to install
  • CE certified for hoisting applications
  • Complete range of "CE" certified electronics and load limiters
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Static Line Tensiometer 5560S-5562S

5560S-5562S Load Cell

Load cells specially designed to measure the tension force applied to a static wire rope or rope fiber.

  • Material:

    Stainless steel (5560S)

    Anodised aluminium alloy (5562S)

  • Easy and fast mounting
  • Protection class: IP67
  • Wide range of cable diameters: from 3 up to 90 mm (0.11 to 3.5")
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Running Line Tensiometer 5570-5575

5570-5575 Load Cell

Load cells specially designed to measure the tension force applied to a running cable or running rope.

  • Custom-made design according to your needs:

    Type of rope (steel, synthetic, optical fiber, umbilical)

    Capacity

    Rope diameter (from 6 up to 115 mm)

    Maximum winding speed

    Accuracy

  • Material:

    Load pin: stainless steel

    Other: nickel-plated steel or stainless steel (option)

  • Protection class: IP65
  • Complete range of CE certified electronics and load limitation devices available
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Running Line Tensiometer with Removable Center Sheave 5580-5585

5580-5585 Load Cell

Load cells specially designed to measure the tension force applied to a running wire rope. The removable center sheave enables easy installation without cutting the winch lines.

  • Material:

    Load pin: stainless steel

    Other components: stainless steel (5580)

    Other components: nickel-plated steel (5585)

  • Wide range of cables (Ø from 6 up to 115 mm)
  • Protection class: IP67
  • Complete range of CE certified electronics and load limitation devices available
  • Custom-made manufacturing
  • Cable length: 6 m (other lengths available on request)
Download datasheet

Tensiometers

General information

These force sensors are intended to measure the tension force applied to a wire rope or rope fibre without having to disassemble it. There are two types:

Through Hole (Annular) Heavy-Capacity Load Cell 5190-5195

5190-5195 Load Cell

Annular compression load cells.

  • Low profile for high-capacity load cells
  • Material: stainless steel (5190) or nickel-plated steel (5195)
  • Protection class: IP65
  • Sturdy design
  • Material: anodised aluminium alloy
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Tension Link Load Cell 5200-5205

5200-5205 Load Cell

Tension link load cells specially adapted for standard shackles.

  • Sturdy design
  • Protection class: IP66
  • Cable length: see drawing table - CL (other lengths available on request)
  • Material: stainless steel (5200), nickel-plated steel (5205)
Download datasheet
Through Hole (Annular) Load Cell 5900

5900 Load Cell

Annular force transducers specially designed for applications requiring a load mesurement through a centred hole.

  • Sturdy design
  • Material: stainless steel
  • Protection class: IP67
  • Easy to install
  • CE certified for hoisting applications
  • Complete range of "CE" certified electronics and load limiters
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Static Line Tensiometer 5560S-5562S

5560S-5562S Load Cell

Load cells specially designed to measure the tension force applied to a static wire rope or rope fiber.

  • Material:

    Stainless steel (5560S)

    Anodised aluminium alloy (5562S)

  • Easy and fast mounting
  • Protection class: IP67
  • Wide range of cable diameters: from 3 up to 90 mm (0.11 to 3.5")
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Running Line Tensiometer 5570-5575

5570-5575 Load Cell

Load cells specially designed to measure the tension force applied to a running cable or running rope.

  • Custom-made design according to your needs:

    Type of rope (steel, synthetic, optical fiber, umbilical)

    Capacity

    Rope diameter (from 6 up to 115 mm)

    Maximum winding speed

    Accuracy

  • Material:

    Load pin: stainless steel

    Other: nickel-plated steel or stainless steel (option)

  • Protection class: IP65
  • Complete range of CE certified electronics and load limitation devices available
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Running Line Tensiometer with Removable Center Sheave 5580-5585

5580-5585 Load Cell

Load cells specially designed to measure the tension force applied to a running wire rope. The removable center sheave enables easy installation without cutting the winch lines.

  • Material:

    Load pin: stainless steel

    Other components: stainless steel (5580)

    Other components: nickel-plated steel (5585)

  • Wide range of cables (Ø from 6 up to 115 mm)
  • Protection class: IP67
  • Complete range of CE certified electronics and load limitation devices available
  • Custom-made manufacturing
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Wireless Load Shackle 5000M-WI

5000M-WI Load Shackle

Wireless load-measuring shackles designed to measure tension force.

  • Sturdy design
  • Easy to install
  • Standard dimensions
  • Frequencies: from 2.4000 to 2.4835 GHz
  • Power: 10 mW, licence: exempted
  • Range: 500 m open field (antenna integrated)
  • Sleep mode, remote wake-up mode, remote control of batteries
  • Not appropriate for overload protection
Download datasheet
Tension Link Load Cell 5200L-5205L

5200L-5205L Load Cell

Tension link load cells specially designed for load limitation on hoisting devices.

  • Sturdy design
  • Breaking load > 500 %
  • CE certified for hoisting devices
  • Protection class: IP66
  • Material: stainless steel (5200L), nickel-plated steel (5205L)
  • Easy to install (standard shackles)
  • Cable length: 0.5...5 t: 3 m (other lengths available on request)

    10 t: 6 m (other lengths available on request)

  • Complete range of CE certified electronics and load limiters available
Download datasheet
Subsea Load Shackle 5050M

5050M Load Shackle

Load measuring shackles designed to measure subsea tension forces.

  • CE certified for hoisting applications
  • Protection class: IP68
  • Depth: up to -7500 m / -24 606 ft (750 bars / 11 000 psi) - deeper on request
  • Sturdy design
  • Material: stainless steel except shackle bow
  • Easy to install
  • Complete range of CE certified electronics, load limiters and display available
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Load Shackle 5000M

5000M Load Shackle

Load measuring shackles designed to measure tension force.

  • CE certified for hoisting applications
  • Sturdy design
  • Load pin material: stainless steel
  • Protection class: IP65
  • Easy to install
  • Cable length: 6 m (other lengths available on request)
  • Complete range of CE certified electronics and load limiters
Download datasheet
Wire Rope Load Cell 5500-5505

5500-5505 Load Cell

Low cost load cells specially designed to measure the tension force on hoisting ropes.

  • CE certified for hoisting applications
  • Easy installation directly without dismantling on the hoisting rope
  • Wide range of measured loads on cable (from 0.25 up to 24 t) and suitable cables (available diameters: from 6 up to 46 mm)
  • Material: 5500: stainless steel, 5505: nickel-plated steel
  • Protection class: IP65
  • Sturdy design
  • Reliable and economical solution
  • Complete range of "CE" certified electronics and load limiters available
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet

Weighing Electronics / Process Controllers

General information

The terminals are developed with the user and application in mind, offering ranges from scale indicators for simple weighing tasks to programmable terminals for the automation of weighing processes.

Weight Indicator Combics

Weight Indicator Combics

A range of indicators are available depending on the resolution, verification capability and use (displays and control panels).

Smart software applications
  • Easy-to-use application software programmes for a variety of uses, such as counting,checking and pre-packaging checking, are pre-installed as a standard feature
Versatile interfaces
  • Optimal connectivity and integration into existing systems, for example via RS 232,RS 485/422, analogue 4–20 mA, digital inputs/outputs, Profibus DP, Ethernet TCP/IP
  • The Combics weighing indicators offers a high-quality scale series for the various applications of the food, pharmaceutical, chemical, metal and electrical industries.
    Combics can adjust optimally to different process requirements due to its high flexibility regarding connection and configuration options.

Download datasheet
PR5500/xx Weight Controller Maxxis 4

Weight Controller Maxxis 4

The freely programmable process controller, designed for applications as diverse as simple weighing complex manual and automatic Batching and single component Filling. Extensive connectivity options and compatibility with all analogue load cells and the digital Pendeo® load cells as well as platform scales and many more weighing solutions.

  • Connection of one analogue or one digital scale or Pendeo® digital load cell system
  • Multiple interface possibilities: Ethernet TCP/IP, Modbus TCP, Profibus DP, DeviceNet, Profinet, Ethernet/IP and USB
  • Automatic backup function saving data to SD cards for full transparency and traceability
  • 4.3" large colour display with multilingual interface and integrated help function for intuitive operation
  • Equipped with an internal web server, the Maxxis 4 can be configured and controlled via any standard web browser
Download datasheet
Weight Controller Maxxis 5

Weight Controller Maxxis 5

The freely programmable process controller, designed for applications as diverse as Phase, Batching, Filling, IBC, Counting and Truck Weighing. Extensive connectivity options and compatibility with all analogue load cells and the digital Pendeo® load cells as well as platform scales and many more weighing solutions.

  • 5.7" large colour display with multilingual interface and integrated help function for intuitive operation
  • Equipped with an internal web server, the Maxxis 5 can be configured and controlled via any standard web browser
  • Integrated A/D-converter for connecting analog platforms
  • Optional RS-232, RS-485, RS-422, 4-20mA, Digital I/O
Download datasheet
Weight Indicator Midrics®

Weight Indicator Midrics®

A range of indicators are available depending on the resolution, verification capability and use (displays and control panels).

  • Display: backlit, 14-segment, 20 mm LCD for weight readouts
  • Material: AISI 304 stainless steel
  • Integrated A/D-converter for connecting analog platforms
  • Optional RS-232, RS-485, RS-422, 4-20mA, Digital I/O
Download datasheet
Weight Indicator X3

Weight indicator X3

The verifiable weight indicator X3 ensures fast and reliable display of the weight values. With the integrated EasyFill® application, filling with liquids, powders or granules can be controlled.

  • High-precision weight indicator offering a resolution of up to 120,000 increments
  • Remote configuration and service functionality through integrated website
  • Multiple data interfaces allow easy integration into process control systems and direct connection of a printer or remote display
  • Large, clearly readable display of weight values, even in direct light
  • Convenient and efficient scale calibration in one minute without weights
  • EasyFill® function for one-component dosing of liquids, powders and granules with configurable target, tolerance and overshoot values
  • Housing suitable for panel mounting
Download datasheet

Weighing Load Cells

General information

The range of force transducers is very wide. This one is characterised by a measurement range varying from 2 kg to 5000 t (tension and/or compression), OIML C1 to C3 approved or industrial with an accuracy of up to 0.01%.

Tension and Compression Load Cell 2710-2715

2710-2715 Load Cell

Universal load cells combining accuracy, sturdiness and easy installation.

  • Material:

    2710: stainless steel

    2715: alloy steel

  • Protection class: IP67
  • Compact design
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Tension and Compression Load Cell 2712

2712 Load Cell

High-accuracy universal load cells, easy to install.

  • Wide range of capacities: from 100 N to 10 kN
  • Overload protection in tension and compression (only for 2712-A and 2712-C)
  • Compact design
  • Protection class: IP54 / IP65
  • Material: anodised aluminium alloy
  • Cable length: 3 m (other lengths available on request)
  • Also available as standard reference load cells according to ISO 376 (classes "1", ''0,5'' and ''00'')
Download datasheet
Hermetically Sealed Bending Beam Load Cell 2000S

2000S Load Cell

Load cell combining high accuracy and resistance in harsh environment.

  • Material: stainless steel
  • Protection class: IP67 (welded sealing)
  • Complies with OIML / R 60 up to 3000 d for scales in class III according to EN 45501
  • Standardised dimensions
  • Cable length: 3 m (other lengths available on request)
  • Whole range of mounting kits available
Download datasheet
Single Point Load Cell "Off Center" 2052

2052 Load Cell

Small-sized single point load cells.

  • Designed for off-center load
  • Maximum platform size: 250x250 / 400x400 mm (depending on capacity)
  • Small sized
  • Material: anodised aluminium alloy
  • Protection class: IP54
  • Cable length: see drawing table - CL (other lengths available on request)
  • Easy to install
Download datasheet
On-Board Weighing Load Cell 2625-2645

2625-2645 Load Cell

Load cells specially designed for on-board weighing on trucks.

  • Very sturdy design
  • High resistance against shocks
  • Protection class: IP67
  • Material: alloy steel
  • Easy to install (no stabilisation system needed)
  • Screws and blocks to be welded available
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Tension Load Cell 5100L-5105L

5100L-5105L Load Cell

Robust and easy to install tension load cells.

  • Wide range of capacities: 2 t up to 100 t
  • Compact design
  • Protection class: IP66
  • Material: stainless steel (5100L), nickel-plated steel (5105L)
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Single Point Load Cell "Off Center" 2022

2022 Load Cell

Single point load cells specially designed for platform and hopper weighing.

  • Designed for off-center load
  • Maximum platform size: 800 x 800 mm
  • Material: anodised aluminium alloy
  • Protection class: IP64
  • Easy to install
  • Complies with OIML / R60 up to 3000 d for scales in class III according to EN 45501
  • Cable length: 3 m (other lengths available on request)
Download datasheet
Single Point Load Cell "Off Center" 2162L

2162L Load Cell

Economical single point load cells specially designed for small platform and hopper weighing.

  • Designed for off-center load
  • Maximum platform size: 400 x 400 mm
  • Material: anodised aluminium alloy
  • Protection class: IP63
  • Easy to install
  • Weight: 0.35 kg
  • Cable length: 2 m (other lengths available on request)
Download datasheet
Double Shear Beam Load Cell 2600

2600 Load Cell

Load cells for silo weighing combining a sturdy design with easy installation.

  • Mounting kits available with following properties:

    Stabilisation without tension rods

    Compensation of thermal dilatations

    Compensation of defective alignment

  • Material: stainless steel
  • Protection class: IP67
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Pendular Compression Load Cell 3100P

3100P Load Cells

Compression load cells

  • Canister, high-capacity load cell (up to 500 t)
  • Made completely of stainless steel
  • Protection class: IP67
  • Pendular technology - Self-restoring
  • Available in C1.5 (1500 d) OIML / R 60 (EN 45501)
  • Matched impedance and sensitivity (for parallel connection)
  • Whole range of mounting accessories is available
  • Cable length: 12 m (500 t: 20 m) (other lengths available on request)
Download datasheet
Insertable Strain Sensor - Insertgage® 3300

3300 Insertable Strain Sensor

Insertable extensometers designed to measure the force in a structure

  • Designed to measure:

    Tension, compression shear and bending force

    Torque

  • One unique model regardless of the capacity range
  • Material: stainless steel
  • Protection class: IP67
  • Easy to install (one hole to drill)
  • Accuracy in the structure: 2 to 5 %
  • Cable length: 0.25 or 5 m (other lengths available on request)
Download datasheet
Shear Beam Load Cell 4500

4500 Load Cell

Load cells for silo weighing combining a sturdy design with easy installation.

  • Mounting kits available with following properties:

    Stabilisation without tension rods

    Anti-lift-off device

    Compensation for thermal dilatations and defective alignment

  • Material: stainless steel
  • Easy to install, cost-effective solution, sturdy design
  • Cable length: see drawing table - CL (other lengths available on request)
Download datasheet
Shear Beam Load Cell 5510

5510 Load Cell

Universal load cell combining sturdy design, high accuracy and low cost.

  • Mounting kits available with following properties:

    Stabilisation without tension rods

    Compensation for thermal dilatations and default of parallelism

  • Material: stainless steel
  • Protection class: IP67
  • Sturdy design
  • Complies with OIML / R60 up to 3000 d for scales in class III (EN 45501)
  • Cable length: 8 m (other lengths available on request)
Download datasheet
Shear Beam Load Cell 3500

3500 Load Cell

Universal load cells combining sturdy design, high accuracy and low cost.

  • Mounting kits available with following properties:

    Stabilisation without tension rods

    Compensation of defaults of parallelism

  • Material: stainless steel
  • Protection class: IP67
  • Sturdy design
  • Cable length: see drawing table (other lengths available on request)
Download datasheet
Low-Profile Compression Load Cell 5910

5910 Load Cell

Load cell combining high capacity with low design.

  • Material: stainless steel
  • Protection class: IP67
  • Low design
  • Sturdy design
  • Easy to install
  • Cable length: 3 m (other lengths available on request)
Download datasheet
Low-Profile Compression Load Cell 5950

5950 Load Cell

Load cells combining high capacity, low design and cost-effective solution.

  • Material: stainless steel
  • Protection class: IP67
  • Low design
  • Sturdy design
  • Easy to install
  • Whole range of mounting kits available
  • Cable length: 6 m (other lengths available on request)
Download datasheet
Wireless Load Shackle 5000M-WI

5000M-WI Load Shackle

Wireless load-measuring shackles designed to measure tension force.

  • Sturdy design
  • Easy to install
  • Standard dimensions
  • Frequencies: from 2.4000 to 2.4835 GHz
  • Power: 10 mW, licence: exempted
  • Range: 500 m open field (antenna integrated)
  • Sleep mode, remote wake-up mode, remote control of batteries
  • Not appropriate for overload protection
Download datasheet

Wheel Load Scales

General information

The wheel load scales are the ideal measuring instrument for portable and extremely accurate wheel, axle or vehicle weighing ranging from two-wheelers and cars to heavy-duty vehicles.

Portable Wheel Load Scale RW 2.0

RW 2.0 Wheel Load Scale

Applications:

  • Weighing of light cars
  • Motorcycle weighing
  • Glider / ultralight weighing
  • Motor racing

This extremely light and flat wheel scale is ideal for mobile weighing operations. The display and evaluation of data is realised with wheel load scale software. Logging and data storage is also possible as a consequence. A level subsurface is a prerequisite for high measurement accuracy. Unsteady wheel load scales would only falsify the results.

  • Factory calibrated
  • Very low design
  • Load range 100 and 500kg
  • High accuracy
  • Accessible via ramps
Download datasheet
Portable Wheel Load Scale RW 8.1

RW 8.1 Wheel Load Scale

Applications:

  • Car weighing
  • Aircraft weighing
  • Column load determination for cranes

The portable wheel scales RW 8.1 are used for precise weighing of private cars, heavy goods vehicles, caravans, trailers and other single and multiple-axle vehicles. Wheel load scale software is available and can display, log and store measured values on the PC. Wheel load scales are easy to transport, set up and operate.

  • Factory calibrated
  • Low design
  • Load range 1,000, 2,000 and 8,000kg
  • High accuracy
  • Via cable or radio transmission
  • Rubber feet to prevent slipping during mounting
  • Optionally available with ramps
Download datasheet
Portable Wheel Load Scale RW 9.1

RW 9.1 Wheel Load Scale

Applications:

  • Weighing of trucks, heavy-duty and special vehicles
  • Exit control in haulage firms
  • Weighing in agricultural applications
  • Aircraft weighing

Type 9.1 wheel load scales are designed for weighing heavy vehicles with large wheels. The effective weighing surface is 600mm x 400mm. The scales are therefore big enough for trucks with twin wheels to drive onto without difficulty. Wheel load scale software is available and can display, log and store the measured values of up to 20 weighing platforms on the PC. These truck scales are also suitable for mobile use and can be combined with other wheel load scales. Integrated rollers and hand grips make it easy for you to align the weighing platforms.

  • Factory calibrated
  • Low design
  • Nominal load up to 10,000kg
  • High accuracy
  • Via cable or radio transmission
  • Rubber feet to prevent slipping during mounting
  • Optionally available with ramps
Download datasheet
Portable Verified Wheel Load Scale RWA 8.1.0 E

RWA 8.1.0 E Verified Wheel Load Scale

Applications:

  • Checking of vehicles by police
  • Checking of weight by certified inspection organisations
  • Vehicle approval for new and modified models

These verified wheel scales are specially designed for quick, precise weighing of vehicles and trailers in mobile applications. Each scale is equipped with a display and operation module and is powered by rechargeable batteries. These scales can be used to realise weighing operations for commercial and official use. The scales are easy to transport, set up and operate.

  • Internationally valid verification
  • Low design
  • Nominal load up to 500, 1,000, 2,000 or 8,000kg
  • High accuracy
  • Rubber feet to prevent slipping during mounting
  • Optionally available with ramps
Download datasheet
Portable Verified Wheel Load Scale RWA 9.1.0 E

RWA 9.1.0 E Verified Wheel Load Scale

Applications:

  • Checking of vehicles by police
  • Checking of weight by certified inspection organisations
  • Vehicle approval for new and modified models
  • Exit control in haulage firms

These verified wheel load scales are specially designed for quick, precise weighing of heavy-duty trucks in mobile applications. Each scale is equipped with a display and operation module and is powered by rechargeable batteries. These wheel scales can be used to realise weighing operations for commercial and official use. The truck scales are easy to transport, set up and operate. Integrated rollers and hand grips make it easy for you to align the weighing platforms.

  • Internationally valid verification
  • Low design
  • Nominal load up to 10,000kg
  • High accuracy
  • Rubber feet to prevent slipping during mounting
  • Optionally available with ramps
Download datasheet

Copyright © 2021 Sensors AS - All Rights Reserved
|HOME| |PRODUCTS| |HYDROPOWER| |NEWS| |CONTACT|
---
Sensors AS | Setersletta 3 | 2006 Løvenstad | Norway | Phone: +47 67 90 43 00 | Org. nr. NO 982 517 346 MVA

Sensors AS