Oil & Subsea

Products > Pressure > Oil & Subsea

General information

We provide a wide variety of pressure transducers and transmitters for oil and gas applications, including onshore, offshore and subsea…

Typical applications

  • Hydraulic control pod for subsea
  • Mud pressures
  • High temperature hydraulic systems
  • Pipeline pressures
  • Production process monitoring
  • Wellhead monitoring
  • Subsea wellhead transmitter
  • Remotely operated vehicles
Standard sensors product portfolios

Examples of customized sensor solutions

Subsea Control Modules -
Pressure Monitoring at the Solenoid of the Subsea Control Unit

ATM Subsea, Right Angled Connection

ATM Subsea Pressure Transmitter with Right Angled Connection

  • Pressure ranges 0 to 690 bar / 1034 bar / 1380 bar
  • Process connection Flange with double o-ring seal
  • Electrical connection 2 pin glass-to-metal seal
  • Temperature range -10 to 40°C compensated
Datasheet on request
Subsea Control Modules

ATM with bulkhead fitting

ATM Subsea Pressure Transmitter with Bulkhead Fitting

  • Pressure ranges 0 to 350 bar / 850 bar
  • Process connection 5/16 – 24 UNF, including pressure snubber
  • Electrical connection Binder connector 723, 5-pins
  • Temperature range -25 to 150°C
Datasheet on request
Hydraulic Pressure Measurement in Subsea Control Module with Water Ambient Pressure of 370 b

ATM Subsea with Special Seacon Connector

ATM Subsea Pressure Transmitter with Special Seacon Connector

  • Pressure ranges: 0 to 15‘000 psi (0 … 1034 bar)
  • Process connection: ¼ NPT female, including pressure snubbers
  • Electrical connection Seacon, type 5507-2003-0004, 3 pins
  • Temperature range -10 to 50°C compensated
Datasheet on request
Subsea BOP Control System

ATM Subsea with special Seacon, type MSSK connector

ATM Subsea Pressure Transmitter with Special Seacon, Type MSSK Connector

  • Pressure ranges 0 to 1‘000 bar
  • Process connection 7/16-20 UNF female
  • Electrical connection Seacon, Typ MSSK-8#16-FCR-HP
  • Temperature range -10 to 50°C compensated
Datasheet on request
Subsea Control Units -
The Water Ingress Detector is Used to Measure a Possible Leak of Saltwater Ingress Into the Control Modules

Water Ingress Detector

Water Ingress Detector

  • Alarm levels 3 different alarm levels
  • Accuracy ± 0.3 mA
  • Electrical connection 6 pin glass-to-metal seal
  • Temperature range -20 to 85°C
Datasheet on request

Copyright © 2020 Sensors AS - All Rights Reserved
|HOME| |PRODUCTS| |HYDROPOWER| |NEWS| |CONTACT|
---
Sensors AS | Setersletta 3 | 2006 Løvenstad | Norway | Phone: +47 67 90 43 00 | Org. nr. NO 982 517 346 MVA

Sensors AS