Categories
Load Cells

Model 5960 / 5962

Compression Load Cell, < 20 kN

  • Protection class: IP65
  • Material:
    – stainless steel (5960)
    – anodised aluminium alloy (5962)
  • Cable length: 1.5 m
Categories
Load Cells

Model 2052

Platform Load Cell, < 200 kg

  • Designed for off-center load
  • Small- sized
  • Max. platform size: 250×250 / 400×400 mm
  • Material: anodised aluminium alloy
  • Protection class: IP54
  • Cable length: 0.5 / 1.5 m
Categories
Wireless Telemetry

Model T24-ACMm

Wireless Sensor Transmitter Enclosures

Sensor Transmitter IP50 Enclosure

  • Wireless range up to 500 m (1,600 ft)
  • Miniature telemetry module measuring 76 x 24 x 20 mm
  • Ideal for load cells, pressure, linear displacement, accelerometer, inclinometers & other current and voltage input sensors
  • Ideal in applications involving rotating parts
Categories
Digital Output Signal Converters

Model DCell

Embedded & PCB Modules

Digital Load Cell Converter

  • Strain gauge to RS485 or CAN digital load cell converter
  • Low profile, small 20 mm diameter for mounting inside sensor
  • Auto calibration or direct entry of mV/V with linearisation
  • Ultra high performance, resolution of 1 part in 200,000 (18bit)
  • Error reporting including strain gauge fault conditions
  • Programmable dynamic filter
  • A miniature digital temperature sensor module for wiring to DCell/DSC temperature sensor pcb board is also available
Categories
Analogue Output Signal Conditioners

Model SGABCM

Bulkhead

Bridge Completion Module for the SGA

  • Easy installation – simply screws into the existing load cell connector on the SGA
  • On-board screw terminal connections accept a wide range of bridge completion resistor enabling on-site installation without soldering equipment
  • High stability resistors (5ppm/°C) fitted for the ‘fixed’ arms of the bridge
Categories
Analogue Output Signal Conditioners

Model ICA5ATEX

Embedded

ATEX Certificated Miniature Load Cell Amplifier

  • ATEX certificated amplifier for hazardous zones 0, 1 & 2
  • Miniature PCB format for fitting inside sensors, 19 mm diameter, 7.6 mm height
  • 2 wire current loop 4-20 mA output
  • Low interaction between the trimmers makes calibration fast and easy
Categories
Analogue Output Signal Conditioners

Model ICA H & S

Embedded

Miniature Strain Gauge Amplifier

  • Fits inside sensors, 19.5 mm diameter, 7.6 mm height
  • Outputs of 4-20 mA, 0-10 V, 0-5 V, ±10 V
  • Non interaction between the trimmers makes calibration fast and easy
  • High speed 1000 Hz
  • 2 wire 4-20 mA load cell option
Categories
Telemetry Systems

Model 7ke

Measuring Amplifier

Flatchip with Integrated Antenna (Special for Chain Application)
– for strain gauge, PT100, thermocouple

  • Sensitivity: 0.02 mV/V to 20 mV/V
  • Bandwidth: 0 (10) Hz to 50 kHz
Categories
Laser Sensors

Model LAS2-TM

Miniature Laser Sensor, < 550 mm

  • Ranges: 26, 120, 350, 550 mm
  • Resolution: 2 µm
  • Linearity max.: ±6 µm
  • Frequency max.: 5 kHz
  • Output: 0…10 V, 4…20 mA
  • Protection class: IP67
Categories
Inductive Sensors LVDT

Model LVISM

Miniature Inductive Sensor LVDT, < 10 mm

  • Measurement range: 2 mm, 5 mm, 10 mm
  • Linearity max.: ±0.25 %
  • Output analogue: 0…10 V, 4…20 mA
  • Protection class: IP65
  • Type: Miniature housing ∅4 mm, rod with M2.5 thread
Categories
Draw Wire Sensors

Model ZX

Miniature Draw Wire Sensor

  • Ranges: 38 mm
  • Linearity max.: ±1 %
  • Output analogue: Potentiometer, 89 % VDC (±3 %) of Excitation Voltage
  • Resolution: 0.04 mm
  • Protection class: IP40
Categories
Analogue Pressure Transmitters

Model ATM.mini

Miniature Pressure Transmitter

  • Pressure measuring range: 0..0.1 up to 0..100 bar
  • Accuracy: up to 0.1 % FS
  • Output signal: 0.5…4.5 VDC / 4…20 mA
  • Material: Stainless steel
  • Negative pressure range available
  • Dynamic measurements
Categories
Passive Level Transducers

Model MTM/N10 (mV)

Miniature Level Transmitter 10mm (mV)

  • Pressure range: 0..10 up to 0..100 mH2O
  • Accuracy: up to 0.25 % FS
  • Output signal: mV
  • Housing: Stainless steel, Titanium
  • Diameter: 10 mm
Categories
GPRS Level Transmitters

Model WMS.mini

Level and Temperature Logger

  • Pressure range: 10…90 mH2O
  • Accuracy: ≤ ± 0.15 % FS
  • Radio interface: 433 MHz
  • Housing: Stainless steel, Titanium
  • Sensors for level and temperature
Categories
Analogue Level Transmitters

Model ATM/N19

Miniature Submersible Level Transmitter 19mm

  • Pressure range: 0..1 up to 0..100 mH2O
  • Accuracy: up to 0.1 % FS
  • Output signal: 0…5 / 0…10 VDC, 4…20 mA
  • Housing: Stainless steel
  • Diameter: 19 mm
  • Dynamic measurements
Categories
Analogue Level Transmitters

Model MTM/N10

Miniature Level Transmitter 10mm (4-20 mA / 0-10 VDC)

  • Pressure range: 0..10 up to 0..100 mH2O
  • Accuracy: up to 0.25 % FS
  • Output signal: 4…20 mA / 0…10 VDC
  • Housing: Stainless steel, Titanium
  • Diameter: 10 mm
Categories
Inclinometers

Model N

Small Inclinometers

Inclination measurement in the ranges of ±10, ±30 and ±70 degrees.