Categories
Tensile and Force Test Machines - Material Testing

Model OmniTest | Twin-column

Twin-column Materials Tester

  • Measuring range (3 models): 10 – 50 kN
  • Accuracy: ≤ ±0.5% of reading
  • Units of measurement: mN, daN, N, kN, gf, kgf, ozf, lbf
  • Connectivity: USB port, extensometer input, 2 additional sensor inputs

Products Material Testing Force Test Machines Model OmniTest | Twin-column

Model OmniTest | Twin-column

Twin-column Materials Tester Model OmniTest

Product features:

  • Measuring range (3 models): 10 – 50 kN
  • Load- accuracy: ≤ ±0.5% of reading
  • Load- resolution: 1:50,000 filtered from 24 bit
  • Units of measurement: mN, daN, N, kN, gf, kgf, ozf, lbf
  • Load- sampling rate: 20 kHz
  • Data-acquisition rate: 500 Hz
  • Speed range:
    0.01 – 1000 mm/min – 10 & 25kN models,
    0.01 – 400 mm/min – 50kN model
  • Speed accuracy: ≤ ±2 % of indicated speed
  • Speed resolution: 0.001 mm/min
  • Displacement:
    950 mm (37″) – 10 & 25kN models
    1100 mm (43″) – 50kN model
  • Displacement- accuracy: ±0.1% of indicated position or ± 0.01 mm, whichever is greater
  • Displacement- resolution: ±0.001mm
  • Connectivity: USB port, extensometer input, 2 additional sensor inputs

Description

A versatile and easy to use materials tester, the twin-column OmniTest is available in 10 kN, 25 kN and 50 kN capacities.

Controlled by VectorPro MT, Mecmesin’s newly developed materials testing software designed for use in QC and R&D laboratories.

Lower capacity models of 5 kN and 7.5 kN are available in the OmniTest single-column range.


Product video