Categories
Digital Output Signal Converters

Model DSCUSB

Desktop

Strain Gauge to USB Converter

  • High stability providing superior performance
  • USB strain gauge interface – device appears as a virtual com port
  • Simple & easy to connect to your strain gauge sensor
  • Multiple devices can be used with one PC
  • Supplied with 1.5m USB to Micro USB lead
  • Free DSCUSB strain gauge to USB converter toolkit software
  • Compatible with most load cells and sensors
Categories
Digital Output Signal Converters

Model DSCUSB-PT

Desktop

Digital Sensor Card USB – Potentiometer Input

  • High precision potentiometer input providing superior performance
  • Simple USB plug and play device connects to a PC directly, allowing quick setup
  • Works with free DSCUSB toolkit software for fast and accurate measurement
  • 7 point linearization and optional temperature compensation
  • Configuration and calibration can be saved and restored for security of setup
Categories
Digital Output Signal Converters

Model FSU-SSB

Desktop

Fast USB Strain Module

  • Simple USB ‘Plug and Measure’ device connects directly to a PC, allowing quick setup
  • High speed measurements at 4800 samples per second
  • 13 bit noise free resolution allows greater accuracy
  • Ideal for impact, drop, non-rotational torque, vibration and materials testing
  • Easy connection to intuitive, powerful FSU Toolkit software
Categories
Digital Indicators Digital Output Signal Converters

Model PSD

Handheld

Strain Gauge or Load Cell Handheld Display

  • Handheld 7 digit LCD display with peak, trough, net, overload and shunt cal indication
  • Battery life of 450 hours in power save mode
  • Keys for on/off, range select, peak/valley hold, and gross/net
  • Single pass calibration (direct mV/V) with dual range for values such as kg and lb
  • Easy to carry – weighing only 250 grams
  • Waterproof IP65 NEMA4 battery powered
  • Microprocessor based, allowing single pass calibration facility (direct mV/V)
Categories
Digital Indicators Digital Output Signal Converters

Model PSD232

Handheld

Strain Gauge or Load Cell Handheld Display with RS232 Data Port

  • The RS232 version of the PSD the load cell or strain gauge handheld display with RS232 interface. This allows for connections to many interfaces including PCs and data loggers.
  • Portable digital display for use as a strain gauge handheld. Easy to carry weighing only 250 grams
  • Waterproof IP65 NEMA4 battery powered
  • 7 digit LCD display, with battery, peak, trough, net, overload and shunt cal indication
Categories
Digital Output Signal Converters

Model DCell

Embedded & PCB Modules

Digital Load Cell Converter

  • Strain gauge to RS485 or CAN digital load cell converter
  • Low profile, small 20 mm diameter for mounting inside sensor
  • Auto calibration or direct entry of mV/V with linearisation
  • Ultra high performance, resolution of 1 part in 200,000 (18bit)
  • Error reporting including strain gauge fault conditions
  • Programmable dynamic filter
  • A miniature digital temperature sensor module for wiring to DCell/DSC temperature sensor pcb board is also available
Categories
Digital Output Signal Converters

Model DSC

Embedded & PCB Modules

Digital Load Cell Converter

  • Strain gauge to RS232, RS485 or CAN digital load cell conditioning card
  • OEM PCB format for easy fitting to products
  • Ultra high performance, resolution of 1 part in 200,000 (18bit)
  • High speed, up to 500 updates per second
  • Auto calibration or direct entry of mV/V with linearisation
  • Programmable dynamic filter
  • Temperature compensation
  • Error reporting including strain gauge fault conditions and overloads
Categories
Digital Output Signal Converters

Model EVAL KIT

Embedded & PCB Modules

Evaluation Kits for DCell & DSC

  • An ideal, low cost way for first time users to familiarise with the digitiser modules in test situations and discover the benefits of the DCell/DSC
  • RS232, RS485 and CAN Kits available
  • One ‘FREE’ DCell or DSC is included in the cost of the kit – mounted and ready to go (the DCell is soldered to the mount and the DSC is screwed to mount)
  • The kit includes everything you need to communicate with the DCell or DSC card from your PC
Categories
Digital Output Signal Converters

Model DSJ1

Accessories

Mount Board for a Single Digital Load Cell Converter

  • Bus connections for communication and power supply
  • 2 part connectors for field terminals
  • D type 9 pin connecter for easy RS232 connection
  • Green LED power indicator
  • Red LED digital output indicator
  • Push switch to simulate digital input
  • CAN compliant – option
  • Choose & add the DSC digital strain card required to fit onto the DSJ1
Categories
Digital Output Signal Converters

Model DSJ4

Accessories

Mount Board for 4 x Digital Load Cell Converters

  • PCB only – for housing 4 x DSC digital load cell converter cards
  • Bus connections for communication and power supply
  • 2 part connectors for field terminals
  • LED power indicator
  • CAN compliant – option
  • Option of a waterproof IP65 enclosure NEMA4 bulkhead mounting in grey ABS or stainless steel case