Categories
Wireless Telemetry

Model T24-SA

Wireless OEM PCB Transmitters

Strain Gauge Sensor Transmitter

  • Wireless strain gauge to radio telemetry converter
  • Miniature PCB for fitting inside sensors
  • Low power mode
  • Remote power ‘on’ and ‘off’
  • High speed 200 updates per second
  • Transmits on licence free 2.4 GHz
  • Simple wireless configuration and calibration
  • Antenna options giving up to 800 m (2,600 ft) range

Products Instrumentation Wireless-Telemetry Model T24-SA

Model T24-SA

Wireless OEM PCB Transmitters

OEM Wireless Strain Gauge Sensor Transmitter Model T24-SA

Product features:

  • Wireless strain gauge to radio telemetry converter
  • Miniature PCB for fitting inside sensors
  • Low power mode
  • Remote power ‘on’ and ‘off’
  • High speed 200 updates per second
  • Transmits on licence free 2.4 GHz
  • Simple wireless configuration and calibration
  • Antenna options giving up to 800 m (2,600 ft) range
  • Choice of enclosures T24-ACM, T24-ACMi, T24-ACMm

Description

This OEM wireless strain gauge sensor transmitter module provides measurement system for strain gauge, pressure, load cell, linear displacement and other 4 wire bridge sensors. Providing direct mV/V input and 5 V bridge excitation for up to 4 load cells. The miniature T24-SA size allows for the option of embedding within the sensor housing.

Click here to view & download associated free software.

Low power modes allow the OEM wireless strain gauge sensor transmitter module to ‘power down’ between transmissions or to ‘power off’ completely and can be controlled by other T24 products such as the handheld displays or a base station. The wireless strain gauge sensor can be configured to last several years on 2 x alkaline AA batteries or alternatively be powered from 2 x NiMH or 1 x 3V Lithium.

The high accuracy, low noise measurement electronics in the T24-SA deliver high resolution, low drift results which can be user calibrated over 9 points to enable linearization and to deliver results in user definable engineering units. The results can be transmitted at rates up to 200 per second to other T24 devices such as handheld displays, analog outputs and base stations etc.

Although the T24-SA can be used as an OEM solution (for example creating a wireless load cell by embedding the module), there are enclosure options available.

The wireless strain gauge sensor transmitter is configured and calibrated (either by applying known inputs or by table entry) using free T24 Toolkit software which runs on a PC connected to a T24 base station.

The T24-SA’s integral antenna option offers up to 600 m (1969 ft) range and external antenna options allows up to 800 m (2600 ft) range in an open field site.

The licence free 2.4 GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals.

See the battery life of your wireless sensing system using the Battery Life Calculator.

Module transmits and Receives giving:
1. Full error detection and correction
2. Calibration & configuration via radio telemetry
3. Ability to be switched from sleep to operating mode via radio
4. mV/V Calibration stored within the module
5. Remote battery check
6. Data Encrytion for complete security (128 bit AES)

*Maximum range achieved in open field site with the T24 acquisition module at a height of 3 metres (9.8 feet) above ground and T24-HS held at chest height pointing towards the acquisition module. Specification at 3V supply at 25°C