Categories
News

XtreMA HP – The New High Precision Torque Flange Sensor Series


The new torque measuring flange series is even more accurate, extremely overload resistant (factor 4), easy to handle and the flange pattern and installation dimensions are compatible with competitor flanges. Whether with standard or DAkkS calibration: we offer you the full service program with short delivery times!

Categories
Dynamic Pressure Sensors

Model CP-Series

High Temperature, < 50 bar

  • High temperature stability up to 700°C
  • Outstanding signal quality during thermal gradients
  • Internal case insulation
  • Active acceleration compensation available
Categories
Dynamic Pressure Sensors

Model CP5X1

High Temperature, < 50 bar

  • Compact design M5x0.8
  • High signal to noise ratio
  • No pyroelectric effect or popcorn noise
  • Up to 560°C and 650°C short term
  • Exeptionally low acceleration sensitivity
Categories
Dynamic Pressure Sensors

Model H-Series

High Pressure, < 8000 bar

  • Ideal for fast pressure gradients i.e. shock waves
  • Outstanding temperature stability
  • Highest durability and reliability
Categories
Dynamic Pressure Sensors

Model P-Series

Dynamic Pressure, < 350 bar

  • High output signal
  • Internal heat conducting element
  • High temperature stability up to 400°C
  • Virtually constant sensitivity over the entire lifetime
Categories
Dynamic Pressure Sensors

Model S-Series

Dynamic Pressure, < 1000 bar

  • Compact design with M5x0.5 thread
  • High temperature stability up to 400°C
  • Wide range of applications
  • Virtually constant sensitivity over the entire lifetime
Categories
Dynamic Pressure Sensors

Model T-Series

Miniature, < 500 bar

  • Miniature design M3.5×0.35
  • High temperature stability up to 400°C
  • Virtually constant sensitivity over the entire lifetime
Categories
Load Cells

Model 2000S

Bending Beam, < 200 kg

  • Material: stainless steel
  • Protection class: IP67 (welded sealing)
  • Standardised dimensions
  • Cable length: 3 m
  • Whole range of mounting kits available
Categories
Load Cells

Model 2600

Double Shear Beam, < 75 t

  • Material: stainless steel
  • Protection class: IP67
  • Mounting kits available with following properties:
    – stabilisation without tension rods
    – compensation of thermal dilatations
    – compensation of defective alignment
  • Cable length: 10 – 20 m
Categories
Load Cells

Model 2625 / 2645

On-board Weighing, < 50 t

  • Very sturdy design
  • High resistance against shocks
  • Protection class: IP67
  • Material: alloy steel
  • Easy to install (no stabilisation system needed)
  • Cable length: 10 m
Categories
Load Cells

Model 3500

Shear Beam, < 10 t

  • Material: stainless steel
  • Protection class: IP67
  • Sturdy design
  • Cable length: 3 – 6 m
Categories
Load Cells

Model 4500

Shear Beam, < 30 t

  • Material: stainless steel
  • Protection class: IP67
  • Easy to install, cost-effective solution, sturdy design
  • Cable length: 6 / 12 m
Categories
Load Cells

Model 5510

Shear Beam, < 2 t

  • Material: stainless steel
  • Protection class: IP67
  • Sturdy design
  • Complies with OIML / R60 up to 3000 d for scales in class III (EN 45501)
  • Cable length: 8 m
Categories
Load Cells

Model 5000

Load Pin, < 2000 t

  • Material: stainless steel
  • Protection class: IP65 (up to IP68: see options)
  • Sturdy design
  • Easy to install
  • Complete range of CE certified electronics, load limiters and displays available for hoisting applications and lifts
  • Cable length: 6 m
Categories
Load Cells

Model 5050

Subsea Load Pin, < 2000 t

  • Custom-made dimensioning
  • Sturdy design
  • Material: stainless steel
  • Protection class: IP68
  • Easy to install
  • Depth: < 7500 m (750 bars)
  • Cable length: 6 m
Categories
Load Cells

Model 5300

Load Pin, < 125 t

  • CE certified for hoisting applications
  • Sturdy design
  • Material: stainless steel
  • Protection class: IP65
  • Easy to install
  • Cable length: 6 m
Categories
Load Cells

Model 2710 / 2715

Tension & Compression, < 100 kN

  • Material:
    – 2710: stainless steel
    – 2715: alloy steel
  • Protection class: IP67
  • Compact design
  • Cable length: 3 / 6 m
Categories
Load Cells

Model 2712

Tension & Compression, < 10 kN

  • Wide range of capacities: from 100 N to 10 kN
  • Overload protection in tension and compression
  • Compact design
  • Protection class: IP54 / IP65
  • Material: anodised aluminium alloy
  • Cable length: 3 m
Categories
Load Cells

Model 5100 / 5105

Tension & Compression, < 50 MN

  • Wide range of capacities: 10 kN (1 t) up to 50 MN (5.000 t)
  • Compact design
  • Protection class: IP66
  • Material:
    – stainless steel (5100)**
    – nickel-plated steel (5105)
  • Cable length: 3 – 12 m
Categories
Load Cells

Model 5100L / 5105L

Tension, < 100 t

  • Wide range of capacities: 2 t up to 100 t
  • Compact design
  • Protection class: IP66
  • Material:
    – stainless steel (5100L)
    – nickel-plated steel (5105L)
  • Cable length: 3 – 12 m
Categories
Load Cells

Model 5200 / 5205

Tension Link, < 500 t

  • Sturdy design
  • Protection class: IP66
  • Material:
    – stainless steel (5200)
    – nickel-plated steel (5205)
  • Cable length: 3 – 12 m
Categories
Load Cells

Model 2960 – 2965

Low-Profile, < 3,000 kN

  • Flat design
  • High stiffness and fatigue resistant
  • Highly resistant to transverse forces
  • Protection class: IP66
  • Material:
    – stainless steel (2960)
    – anodised aluminium alloy (2962)
    – alloy steel (2965)
Categories
Load Cells

Model 3100P

Compression, < 500 t

  • Material: stainless steel
  • Protection class: IP67
  • Pendular technology – Self-restoring
  • Available in C1.5 (1500 d) OIML / R 60 (EN 45501)
  • Matched impedance and sensitivity (for parallel connection)
Categories
Load Cells

Model 3110 / 3115

Compression, < 5,000 t

  • Wide range of capacities: 30 kN (3 t) up to 50 MN (5,000 t)
  • Material:
    – nickel-plated steel (3115)
    – stainless steel (3110)
  • Protection class: IP65
  • Also available as standard reference load cells according to ISO 376 (classes 1, 0,5 and 00 – see specific data sheet 3115-ISO)
Categories
Load Cells

Model 5180 / 5182

Compression Washer Through Hole, < 750 kN

  • Very low profile for high-capacity load cells
  • Material:
    – stainless steel body; aluminium housing (5180)
    – anodised aluminium alloy (5182)
    – 2 washers (included): stainless steel
  • Protection class: IP65
  • Cable length: 2 / 3 m
Categories
Load Cells

Model 5190 / 5195

Through Hole, < 30 MN

  • Low profile for high-capacity load cells
  • Material:
    – stainless steel (5190)
    – nickel-plated steel (5195)
  • Protection class: IP65
  • Sturdy design
Categories
Load Cells

Model 5900

Through Hole, < 15 t

  • Sturdy design
  • Material: stainless steel
  • Protection class: IP67
  • Easy to install
  • CE certified for hoisting applications
  • Cable length: 6 m
Categories
Load Cells

Model 5910

Compression, < 5 t

  • Material: stainless steel
  • Protection class: IP67
  • Low design
  • Sturdy design
  • Easy to install
  • Cable length: 3 m
Categories
Load Cells

Model 5950

Compression, < 20 t

  • Material: stainless steel
  • Protection class: IP67
  • Low design
  • Sturdy design
  • Easy to install
  • Whole range of mounting kits available
Categories
Load Cells

Model 5960 / 5962

Compression, < 20 kN

  • Protection class: IP65
  • Material:
    – stainless steel (5960)
    – anodised aluminium alloy (5962)
  • Cable length: 1.5 m
Categories
Load Cells

Model 2022

Platform, < 500 kg

  • Designed for off-center load
  • Max. platform size: 800 x 800 mm
  • Material: anodised aluminium alloy
  • Protection class: IP64
  • Cable length: 3 m
Categories
Load Cells

Model 2052

Platform, < 200 kg

  • Designed for off-center load
  • Small- sized
  • Max. platform size: 250×250 / 400×400 mm
  • Material: anodised aluminium alloy
  • Protection class: IP54
  • Cable length: 0.5 / 1.5 m
Categories
Load Cells

Model 2162L

Platform, < 75 kg

  • Designed for off-center load
  • Max. platform size: 400 x 400 mm
  • Material: anodised aluminium alloy
  • Protection class: IP63
  • Cable length: 2 m
Categories
Load Cells

Model 5000M-WI

Wireless Load Shackle, < 400 t

  • Protection class: IP65
  • Easy to install
  • Load pin material: stainless steel
  • Frequencies: from 2.4000 to 2.4835 GHz
  • Range: 500 m open field (antenna integrated)
  • Sleep mode, remote wake-up mode, remote control of batteries
Categories
Load Cells

Model 5560S / 5562S

Static Line Tensionmeter, < 75 t

  • Easy and fast mounting
  • Protection class: IP67
  • Wide range of cable diameters: from 3 up to 90 mm
  • Material: stainless steel / anodised aluminium alloy
Categories
Load Cells

Model 5570 / 5575

Running Line Tensionmeter, < 600 t

  • Wide range of cables (Ø from 6 up to 115 mm)
  • Protection class: IP65
  • Material: stainless steel / nickel-plated steel
  • Custom-made manufacturing
Categories
Load Cells

Model 5580 / 5585

Running Line Tensionmeter, < 600 t

  • Removable center sheave
  • Wide range of cables (Ø from 6 up to 115 mm)
  • Protection class: IP67
  • Material: stainless steel / nickel-plated steel
  • Custom-made manufacturing
Categories
Telemetry Systems

Model Samy Flex

Measuring Amplifier

– for strain gauge, PT100

  • Sensitivity: 0.02 mV/V to 11 mV/V
  • Bandwidth: 10 Hz to 10 kHz
  • Strain gauge brigde supply: 3.3 V
  • Strain gauge bridge resistance: 350 (120, 1000)
Categories
Telemetry Systems

Model Kalimero

Measuring Amplifier

– for thermocouple (isolated or non-isolated), PT100, strain gauge

  • Measuring range: up to 1000°C
  • Bandwidth: up to 500 Hz with 1 channel, up to 100 Hz with 16 channels
Categories
Telemetry Systems

Model 4b

Measuring Amplifier

– for strain gauge, PT100, thermocouple

  • Sensitivity: 0.02 mV/V to 20 mV/V
  • Bandwidth: 0 (10) Hz to 50 kHz