Categories
Load Cells

Model Contego

Hygienic Load Cell, < 2 t

  • Accuracy class: D1 (0.04 %) / C3 (0.015 %)
  • Capacities: 100 kg up to 2.000 kg
  • Material:
    – Sensor: stainless steel 1.4542
    – Mounting kit: stainless steel 1.4404
    – Bellows: silicon (FDA-compliant)
  • Protection class: IP68/IP69
Categories
Load Cells

Model 2960 – 2965

Low-Profile Load Cell, < 3,000 kN

  • Flat design
  • High stiffness and fatigue resistant
  • Highly resistant to transverse forces
  • Protection class: IP66
  • Material:
    – stainless steel (2960)
    – anodised aluminium alloy (2962)
    – alloy steel (2965)
Categories
Load Cells

Model 3100P

Compression Load Cell, < 500 t

  • Material: stainless steel
  • Protection class: IP67
  • Pendular technology – Self-restoring
  • Available in C1.5 (1500 d) OIML / R 60 (EN 45501)
  • Matched impedance and sensitivity (for parallel connection)
Categories
Load Cells

Model 3110 / 3115

Compression Load Cell, < 5,000 t

  • Wide range of capacities: 30 kN (3 t) up to 50 MN (5,000 t)
  • Material:
    – nickel-plated steel (3115)
    – stainless steel (3110)
  • Protection class: IP65
  • Also available as standard reference load cells according to ISO 376 (classes 1, 0,5 and 00 – see specific data sheet 3115-ISO)
Categories
Load Cells

Model 5180 / 5182

Compression Washer Through Hole Load Cell, < 750 kN

  • Very low profile for high-capacity load cells
  • Material:
    – stainless steel body; aluminium housing (5180)
    – anodised aluminium alloy (5182)
    – 2 washers (included): stainless steel
  • Protection class: IP65
  • Cable length: 2 / 3 m
Categories
Load Cells

Model 5190 / 5195

Through Hole Load Cell, < 30 MN

  • Low profile for high-capacity load cells
  • Material:
    – stainless steel (5190)
    – nickel-plated steel (5195)
  • Protection class: IP65
  • Sturdy design
Categories
Load Cells

Model 5900

Through Hole Load Cell, < 15 t

  • Sturdy design
  • Material: stainless steel
  • Protection class: IP67
  • Easy to install
  • CE certified for hoisting applications
  • Cable length: 6 m
Categories
Load Cells

Model 5910

Compression Load Cell, < 5 t

  • Material: stainless steel
  • Protection class: IP67
  • Low design
  • Sturdy design
  • Easy to install
  • Cable length: 3 m
Categories
Load Cells

Model 5950

Compression Load Cell, < 20 t

  • Material: stainless steel
  • Protection class: IP67
  • Low design
  • Sturdy design
  • Easy to install
  • Whole range of mounting kits available
Categories
Load Cells

Model 5960 / 5962

Compression Load Cell, < 20 kN

  • Protection class: IP65
  • Material:
    – stainless steel (5960)
    – anodised aluminium alloy (5962)
  • Cable length: 1.5 m
Categories
Load Cells

Model 2022

Platform Load Cell, < 500 kg

  • Designed for off-center load
  • Max. platform size: 800 x 800 mm
  • Material: anodised aluminium alloy
  • Protection class: IP64
  • Cable length: 3 m
Categories
Load Cells

Model 2162L

Platform Load Cell, < 75 kg

  • Designed for off-center load
  • Max. platform size: 400 x 400 mm
  • Material: anodised aluminium alloy
  • Protection class: IP63
  • Cable length: 2 m
Categories
Load Cells

Model 5000M-WI

Wireless Load Shackle, < 400 t

  • Protection class: IP65
  • Easy to install
  • Load pin material: stainless steel
  • Frequencies: from 2.4000 to 2.4835 GHz
  • Range: 500 m open field (antenna integrated)
  • Sleep mode, remote wake-up mode, remote control of batteries
Categories
Load Cells

Model 5560S / 5562S

Static Line Tensionmeter, < 75 t

  • Easy and fast mounting
  • Protection class: IP67
  • Wide range of cable diameters: from 3 up to 90 mm
  • Material: stainless steel / anodised aluminium alloy
Categories
Load Cells

Model 5570 / 5575

Running Line Tensionmeter, < 600 t

  • Wide range of cables (Ø from 6 up to 115 mm)
  • Protection class: IP65
  • Material: stainless steel / nickel-plated steel
  • Custom-made manufacturing
Categories
Load Cells

Model 5580 / 5585

Running Line Tensionmeter, < 600 t

  • Removable center sheave
  • Wide range of cables (Ø from 6 up to 115 mm)
  • Protection class: IP67
  • Material: stainless steel / nickel-plated steel
  • Custom-made manufacturing
Categories
Wireless Telemetry

Model X24-ACMi-SA

Wireless Sensor Transmitter Enclosures

ATEX / IECEx Telemetry Strain Transmitter Module

  • Approved for use in explosive atmospheres Zone 1, Zone 2
  • 800 m (½ mile) range
  • Long battery life: 2 years at 12 sessions of 5 minutes per day; 30 days continuous
  • High accuracy, extremely low temperature drift
  • High resolution ratio-metric/bridge measurement
  • Up to 1 part in 400,000 (18.75 bits) noise free resolution
Categories
Wireless Telemetry

Model X24-HD

Wireless Sensor Receivers & Displays

ATEX / IECEx Handheld Telemetry Display

  • Approved for use in explosive atmospheres Zone 1, Zone 2
  • Covers multiple usage scenarios
  • Use with single or multiple transmitters
  • Long battery life: 50 days at 12 sessions of 5 minutes per day; 54 hours continuous
  • 800m (½ mile) range
Categories
Wireless Telemetry

Model X24-SAe

Wireless OEM PCB Transmitters

ATEX Strain Transmitter Module

  • Approved for use in explosive atmospheres Zone 1, Zone 2, Zone 21, Zone 22
  • Facilitates construction of certified load cells and products
  • 800 m (½ mile) range
  • Long battery life: 2 years at 12 sessions of 5 minutes per day; 30 days continuous
  • High accuracy, extremely low temperature drift
  • High resolution ratio-metric/bridge measurement
Categories
Analogue Output Signal Conditioners

Model ALA5

ATEX Approved

ATEX Certified 4-20 mA Load Cell Amplifier

  • ATEX certificated amplifier for hazardous zones 0, 1 & 2
  • Designed for fitting in-line to strain gauge sensors such as load cells
  • Intrinsically safe to EN60079-11
  • Provides 2-wire 4-20 mA current loop output
  • Environmentally sealed to IP67
Categories
Analogue Output Signal Conditioners

Model ICA5ATEX

Embedded

ATEX Certificated Miniature Load Cell Amplifier

  • ATEX certificated amplifier for hazardous zones 0, 1 & 2
  • Miniature PCB format for fitting inside sensors, 19 mm diameter, 7.6 mm height
  • 2 wire current loop 4-20 mA output
  • Low interaction between the trimmers makes calibration fast and easy
Categories
Telemetry Systems

Model Samy Flex

Measuring Amplifier

– for strain gauge, PT100

  • Sensitivity: 0.02 mV/V to 11 mV/V
  • Bandwidth: 10 Hz to 10 kHz
  • Strain gauge brigde supply: 3.3 V
  • Strain gauge bridge resistance: 350 (120, 1000)
Categories
Telemetry Systems

Model Kalimero

Measuring Amplifier

– for thermocouple (isolated or non-isolated), PT100, strain gauge

  • Measuring range: up to 1000°C
  • Bandwidth: up to 500 Hz with 1 channel, up to 100 Hz with 16 channels
Categories
Telemetry Systems

Model 4b

Measuring Amplifier

– for strain gauge, PT100, thermocouple

  • Sensitivity: 0.02 mV/V to 20 mV/V
  • Bandwidth: 0 (10) Hz to 50 kHz
Categories
Telemetry Systems

Model 7ke

Measuring Amplifier

Flatchip with Integrated Antenna (Special for Chain Application)
– for strain gauge, PT100, thermocouple

  • Sensitivity: 0.02 mV/V to 20 mV/V
  • Bandwidth: 0 (10) Hz to 50 kHz
Categories
Telemetry Systems

Model 3

Transmission Unit

Pickup Type 3 – Customizable

Categories
Telemetry Systems

Model 8c

Transmission Unit

Pickup Type 8c

Categories
Telemetry Systems

Model 9c

Transmission Unit

Pickup Type 9c

Categories
Telemetry Systems

Universal Shaft Transmitter

Transmission Unit

– non dividable
– without amplifier

Categories
Telemetry Systems

Model AW_DAnt

Evaluation Unit

1 Channel PCM Receiver
– with integrated pick up

  • Bandwidth: 0 to 1 kHz (10kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA, frequency, binary
  • RF power: 1 W, 3 W
Categories
Telemetry Systems

Model OptiMA

Evaluation Unit

1 to 2 Channel PCM Receiver
– extraordinary transmission range up to 50 mm

  • Bandwidth: 0 to 1 kHz (10kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA, frequency, binary
  • RF power: 3 W
  • Protection class: IP67
Categories
Telemetry Systems

Model AW_M

Evaluation Unit

1 Channel PCM Receiver

  • Bandwidth: 0 to 1 kHz (10kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA, frequency, binary
  • RF power: 1 W, 3 W
Categories
Telemetry Systems

Model MAW_F

Evaluation Unit

1 to 64 Channel PCM Receiver

  • Bandwidth: 0 to 1 kHz (10 kHz, 50 kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA option
  • Digital interface (option): USB, Ethernet (TCP/IP), EtherCAT
Categories
Advanced Torque Sensors

Model XtreMA

Torque Measuring Flanges, < 10 kNm

highly accurate. flexible. efficient.

For the vehicle sector, the Co2 discussions are demanding ever higher requirements in terms of accuracy and resolution of the torque measurement signal. For further optimization of the efficiency, the accuracy of the dynamic torque measurement is of fundamental importance.

Categories
Advanced Torque Sensors

Model XtreMAX

Torque Measuring Flanges, < 500 kNm

XtreMAX – The torque flange series for power and efficiency increases in large engines, wind power, marine engines as well as gas turbines and much more.

Categories
Advanced Torque Sensors

High-Speed Torque Measurement

High-speed. Speed-proof. Customized, < 2 kNm

In the field of aviation and for the development of e-mobility, test benches with high speeds of 55,000 -1 / min. are required.

Long-standing partnerships in the aviation industry, in particular the turbine sector, have provided us with extensive experience in the manufacture of suitable sensors.

Categories
Advanced Torque Sensors

Model TelMA

TelMA-Torque

revolutionary. miniaturised. contactless.

TelMA Torque offers predictive maintencance, data for machine control and condition monitoring for any aggregates (gearboxes, motors, pumps, generators, agricultural vehicles, etc.) as a cost-effective, dynamic torque acquisition and thus offers you the possibility to further develop your product Industry 4.0.

Is not an OEM product, but a universal solution that offers the tool Industry 4.0 and new competitive advantages to German mechanical engineering. Be part of it!

Categories
Advanced Torque Sensors

Torque Measuring Shafts

The Compact and Inexpensive Solution for Component Test Benches, < 1 kNm

We offer bearingless torque measuring shafts. This solution is more favorable from an overall point of view, as the couplings and the bearing bracket can be dispensed with. Furthermore, more compact designs are possible. Especially when it comes to accuracy, the bearingless shaft has clear advantages.

Categories
Advanced Torque Sensors

Vehicle Transducers

Know-how and Operational Reliability for Vehicle Optimization

Improved measuring equipment is an essential requirement for further vehicle optimization and thus also for meeting legal requirements.

In the meantime, it had to be acknowledged that tests and measurements on the test bench only partially reflect reality. Measurements under real driving conditions are indispensable for realistic consumption and emission considerations.

Categories
Advanced Torque Sensors

Customized Measuring Sensors

According to Your Requirements

Whether on the test bench or in practice – today’s high demands on power density and service life place the highest requirements on technical measurements. High temperatures up to 200 ° C, high speeds (> 100,000 ), electromagnetic compatibility and last but not least a very confined space.