Categories
Telemetry Systems

Model Samy Flex

Measuring Amplifier

– for strain gauge, PT100

  • Sensitivity: 0.02 mV/V to 11 mV/V
  • Bandwidth: 10 Hz to 10 kHz
  • Strain gauge brigde supply: 3.3 V
  • Strain gauge bridge resistance: 350 (120, 1000)
Categories
Telemetry Systems

Model Kalimero

Measuring Amplifier

– for thermocouple (isolated or non-isolated), PT100, strain gauge

  • Measuring range: up to 1000°C
  • Bandwidth: up to 500 Hz with 1 channel, up to 100 Hz with 16 channels
Categories
Telemetry Systems

Model 4b

Measuring Amplifier

– for strain gauge, PT100, thermocouple

  • Sensitivity: 0.02 mV/V to 20 mV/V
  • Bandwidth: 0 (10) Hz to 50 kHz
Categories
Telemetry Systems

Model 7ke

Measuring Amplifier

Flatchip with Integrated Antenna (Special for Chain Application)
– for strain gauge, PT100, thermocouple

  • Sensitivity: 0.02 mV/V to 20 mV/V
  • Bandwidth: 0 (10) Hz to 50 kHz
Categories
Telemetry Systems

Model 3

Transmission Unit

Pickup Type 3 – Customizable

Categories
Telemetry Systems

Model 8c

Transmission Unit

Pickup Type 8c

Categories
Telemetry Systems

Model 9c

Transmission Unit

Pickup Type 9c

Categories
Telemetry Systems

Universal Shaft Transmitter

Transmission Unit

– non dividable
– without amplifier

Categories
Telemetry Systems

Model AW_DAnt

Evaluation Unit

1 Channel PCM Receiver
– with integrated pick up

  • Bandwidth: 0 to 1 kHz (10kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA, frequency, binary
  • RF power: 1 W, 3 W
Categories
Telemetry Systems

Model OptiMA

Evaluation Unit

1 to 2 Channel PCM Receiver
– extraordinary transmission range up to 50 mm

  • Bandwidth: 0 to 1 kHz (10kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA, frequency, binary
  • RF power: 3 W
  • Protection class: IP67
Categories
Telemetry Systems

Model AW_M

Evaluation Unit

1 Channel PCM Receiver

  • Bandwidth: 0 to 1 kHz (10kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA, frequency, binary
  • RF power: 1 W, 3 W
Categories
Telemetry Systems

Model MAW_F

Evaluation Unit

1 to 64 Channel PCM Receiver

  • Bandwidth: 0 to 1 kHz (10 kHz, 50 kHz)
  • Output: 0 to ±10 V, (0 (4) to 20 mA option
  • Digital interface (option): USB, Ethernet (TCP/IP), EtherCAT
Categories
Advanced Torque Sensors

Model XtreMA

Torque Measuring Flanges, < 10 kNm

highly accurate. flexible. efficient.

For the vehicle sector, the Co2 discussions are demanding ever higher requirements in terms of accuracy and resolution of the torque measurement signal. For further optimization of the efficiency, the accuracy of the dynamic torque measurement is of fundamental importance.

Categories
Advanced Torque Sensors

Model XtreMAX

Torque Measuring Flanges, < 500 kNm

XtreMAX – The torque flange series for power and efficiency increases in large engines, wind power, marine engines as well as gas turbines and much more.

Categories
Advanced Torque Sensors

High-Speed Torque Measurement

High-speed. Speed-proof. Customized, < 2 kNm

In the field of aviation and for the development of e-mobility, test benches with high speeds of 55,000 -1 / min. are required.

Long-standing partnerships in the aviation industry, in particular the turbine sector, have provided us with extensive experience in the manufacture of suitable sensors.

Categories
Advanced Torque Sensors

Model TelMA

TelMA-Torque

revolutionary. miniaturised. contactless.

TelMA Torque offers predictive maintencance, data for machine control and condition monitoring for any aggregates (gearboxes, motors, pumps, generators, agricultural vehicles, etc.) as a cost-effective, dynamic torque acquisition and thus offers you the possibility to further develop your product Industry 4.0.

Is not an OEM product, but a universal solution that offers the tool Industry 4.0 and new competitive advantages to German mechanical engineering. Be part of it!

Categories
Advanced Torque Sensors

Torque Measuring Shafts

The Compact and Inexpensive Solution for Component Test Benches, < 1 kNm

We offer bearingless torque measuring shafts. This solution is more favorable from an overall point of view, as the couplings and the bearing bracket can be dispensed with. Furthermore, more compact designs are possible. Especially when it comes to accuracy, the bearingless shaft has clear advantages.

Categories
Advanced Torque Sensors

Vehicle Transducers

Know-how and Operational Reliability for Vehicle Optimization

Improved measuring equipment is an essential requirement for further vehicle optimization and thus also for meeting legal requirements.

In the meantime, it had to be acknowledged that tests and measurements on the test bench only partially reflect reality. Measurements under real driving conditions are indispensable for realistic consumption and emission considerations.

Categories
Advanced Torque Sensors

Customized Measuring Sensors

According to Your Requirements

Whether on the test bench or in practice – today’s high demands on power density and service life place the highest requirements on technical measurements. High temperatures up to 200 ° C, high speeds (> 100,000 ), electromagnetic compatibility and last but not least a very confined space.

Categories
Advanced Torque Sensors

Model XtreMA “Two-in-One”

Standard Dual-range Torque Transducer

As the requirements to measure torques of different load ranges with one measuring element are increasing, we now offer the standard dual-range torque transducer XtreMA “Two-in-One”.

This means that very high and very low torques can be easily recorded and measured very precisely with one measuring sensor.

Categories
Pressure and Temperature - Pressure Transmitters

Model ATM.1ST/T

High Precision Pressure and Temperature Transmitter

  • Pressure measuring range: 100 mbar…25 bar
  • Accuracy: up to ≤ ± 0.10 % FS
  • Temperature measuring range: -50…150 °C
  • Output signal: 4…20 mA
  • Materials: Stainless steel, Hastelloy, Titanium
Categories
Digital Pressure Transmitters

Model DTM.OCS.S

High Precision Digital Pressure Transmitter with Standard Modbus Interface

  • Pressure range: 0..0.2 up to 0..100 bar
  • Accuracy: up to 0.03 % FS
  • Output signal: RS485 (Modbus)
  • Housing: Stainless steel, Titanium
Categories
Analogue Pressure Transmitters

Model ATM.1ST

High Precision Pressure Transmitter

  • Pressure measuring range: 50 mbar…1000 bar
  • Accuracy: up to ≤ ± 0.05 % FS
  • Output signal: 0…5 / 0…10 VDC, 4…20 mA
  • Materials: Stainless steel, Titanium, Hastelloy
  • Process connection: G 1/4 F, 1/4 NPT, 1/2 NPT, G 1/4 M, G 1/2 M
  • Barometric or negative pressure ranges available
Categories
Analogue Pressure Transmitters

Model ATM.mini

Miniature Pressure Transmitter

  • Pressure measuring range: 0..0.1 up to 0..100 bar
  • Accuracy: up to 0.1 % FS
  • Output signal: 0.5…4.5 VDC / 4…20 mA
  • Material: Stainless steel
  • Negative pressure range available
  • Dynamic measurements
Categories
Pressure and Temperature - Level Transmitters

Model ATM.1ST/N/T

High Precision Level and Temperature Transmitter

  • Pressure range: 0..1 up to 0..250 mH2O
  • Temperature range: -5…80 °C
  • Accuracy: up to 0.05 % FS
  • 2 Output signals: 0…5 / 0…10 VDC, 4…20 mA
  • Housing: Stainless steel, Hastelloy, Titanium
Categories
Digital Level Transmitters

Model DTM.OCS.S/N

High Precision Digital Level Transmitter with Standard Modbus Interface

  • Pressure range: 0..1 up to 0..250 mH2O
  • Accuracy: up to 0.03 % FS
  • Output signal: RS485 (Modbus)
  • Housing: Stainless steel, Titanium
Categories
Analogue Level Transmitters

Model ATM.1ST/N

High Precision Submersible Level Transmitter 24mm

  • Pressure range: 0..0.5 up to 0..250 mH2O
  • Accuracy: up to 0.05 % FS
  • Output signal: 0…5 / 0…10 VDC, 4…20 mA
  • Housing: Stainless steel, Hastelloy, Titanium
  • Diameter: 24 mm
Categories
ATEX/IECx Pressure Transmitters

Model ATM.1ST/Ex

High Precision Pressure Transmitter

  • Pressure measuring range: 50 mbar…1000 bar
  • Accuracy: ≤ ± 0.10 / 0.05 % FS
  • Output signal: 4…20 mA
  • Housing: Stainless steel, Titanium, Hastelloy
  • Barometric or negative pressure ranges available
  • ATEX, IECEx, EAC, GL/DNV, ABS, Lloyds
Categories
ATEX/IECx Level Transmitters

Model ATM.1ST/N/Ex

High Precision Level Transmitter

  • Pressure range: 0..0.5 up to 0..250 mH2O
  • Accuracy: up to 0.05 % FS
  • Output signal: 4…20 mA
  • Housing: Stainless steel, Hastelloy, Titanium
  • ATEX, IEC Ex, EAC, GL/DNV, ABS, Loyds